Furnaces
Stay warm & cozy inside when it’s chilly or bone-chilling outside.
Upgrade to a high efficiency model and get rebates up to $400.
How it works
Visit the Find a Contractor Tool. Enter the home address, city, or zip and select "Furnace Replacement" under the "Services Provided" tab to find a contractor.
A participating contractor will come to your home with information about furnace equipment that qualifies for rebates.
Your contractor will:
- Properly size the equipment for maximum efficiency.
- Remove the old model and install your new unit.
- Fill out and submit a rebate form for you online.
Your rebate check will arrive by mail in six to eight weeks.
Newer furnaces operate up to 50% more efficiently than older units. You’ll save money and energy after replacing your unit.
If you are a DTE residential natural gas customer, you are eligible for furnace and thermostat replacement rebates. If you are a DTE residential electric customer, you are eligible to replace your air source or ground source heat pump or ductless mini-split. Electric rebates can be found in the table on this page. New construction and first-time installation are not eligible for this rebate program.
For more information, please call us toll free, (866) 796-0512 or email us.
| Natural Gas Heating Equipment† | Rebates |
|---|---|
| Furnace 98% AFUE 97% AFUE 96% AFUE 95% AFUE | $400
|
| Tune-Up with combustion analysis | $75
|
AFUE (Annual Fuel Utilization Efficiency) is a measure of how efficiently your furnace can utilize its fuel. The higher the AFUE percentage, the better. (Minimum efficiency, 80%; Mid-Efficiency, 95%; High-Efficiency, 96%-98%)
† Premise eligibility is limited to single family homes. Single family homes are defined as 2 or less connected units. Each unit must be individually metered for natural gas and electric and each unit must have its own heating, cooling and water heating equipment.
Search the DTE directory for participating contractors.
For more information, please call us toll free, (866) 796-0512 or email us.
Furnace Savings Calculator
How much could you save with a high-efficiency furnace?
Limited Funds Available
Electric Customers
27%
Natural Gas Customers
36%
Rebates funds are available on a first-come, first-served basis and customers are encouraged to apply early, as program funds are limited.
Furnaces
Stay warm & cozy inside when it’s chilly or bone-chilling outside.
Have a diagnostic tune-up with combustion analysis completed for your furnace and receive a $75 rebate.
How it works
Visit the Find a Contractor Tool. Enter the home address, city, or zip and select "Furnace Tune-Up with Combustion Analysis" under the "Services Provided" tab to find a contractor
A participating contractor will use advanced diagnostic tools to check and adjust your furnace for efficiency, safety and reliability - optimizing and extending the life of your equipment.
Your contractor will:
- Conduct a tune-up with combustion analysis, ensuring optimal performance from your equipment and lowering your energy costs.
- Fill out and submit a rebate form for you online.
- Your rebate check will arrive by mail in six to eight weeks.
You qualify for a Tune-Up with Combustion Analysis rebate if you are a DTE residential, natural gas customer and natural gas is the primary heat source for your home. Your furnace must have a minimum 40,000 BTU capacity.
Premise eligibility is limited to single family homes. Single family homes are defined as 2 or less connected units. Each unit must be individually metered for natural gas and electric and each unit must have its own heating, cooling and water heating equipment.There is a limit of one rebate per gas-fired furnace Tune-Up with Combustion Analysis every two years.
A participating contractor must perform the Tune-Up with Combustion Analysis and then submit your rebate application within 20 days of service.
For more information, please call us toll free, (866) 796-0512 or email us.
Search the DTE directory for participating contractors.
For more information, please call us toll free, (866) 796-0512 or email us.
Limited Funds Available
Electric Customers
27%
Natural Gas Customers
36%
Rebates funds are available on a first-come, first-served basis and customers are encouraged to apply early, as program funds are limited.
Furnace Tips
Get an Annual Tune-Up
Keep your heating system at peak performance by having an annual tune-up before cold temperatures set in. DTE provides rebates to help offset the cost of a diagnostic tune-up with combustion analysis every 2 years.
Clean or Replace Filters
Dirty filters block airflow, causing your furnace and central air conditioning to work harder and less economically. Clean or replace furnace and air filters regularly - at least every three months.
Lower Your Heating Costs
Set your thermostat between 68 and 70 degrees when you're home and 65 degrees or lower when you're away. You can save around 3% on heating costs for each degree you lower your thermostat.